Poly(hexyl methacrylate) solution
Poly(hexyl methacrylate) solution (CAS: 25087-17-6) is a methacrylate polymer supplied by Tech Serve Solutions. With an average molecular weight of approximately 400,000 g/mol (by GPC) and a glass transition temperature of -5 °C, this hydrophobic polymer is typically provided as a solution in toluene. Its properties make it suitable for applications in materials science, micro/nanoelectronics, and as a component in flexible organic transistors.
Materials Science Research
Used in research and development for novel material formulations due to its hydrophobic nature and polymer characteristics. Its properties are beneficial for exploring new material functionalities.
Flexible Organic Electronics
Serves as a key component in the development of flexible organic transistors. Its polymer structure and solution-state properties facilitate thin-film deposition and device fabrication.
Microelectronics and Nanotechnology
Applied in micro/nanoelectronics fabrication processes, including self-assembly and contact printing techniques. The polymer's characteristics are advantageous for creating fine-patterned structures.
Hydrophobic Coatings and Films
Its inherent hydrophobicity makes it a candidate for developing water-repellent coatings and films in various research applications.
| Linear formula | (C10H18O2)n |
|---|---|
| Density | 1.007 g/mL at 25 °C |
| Refractive index | n20/D 1.481 |
| Concentration | in toluene |
| Vapour density | 1.2 (37 °C, vs air) |
Hazard statements
- H225Highly flammable liquid and vapour
- H304May be fatal if swallowed and enters airways
- H315Causes skin irritation
- H336May cause drowsiness or dizziness
- H361D
- H373May cause damage to organs through prolonged exposure
- H411Toxic to aquatic life with long-lasting effects
Precautionary statements
- P210Keep away from heat, sparks and open flames. No smoking
- P261Avoid breathing dust, fume, gas or vapours
- P273Avoid release to the environment
- P281Use personal protective equipment as required
- P301IF SWALLOWED
- P331Do NOT induce vomiting
| Flash point | 4 °C / 39.2 °F |
|---|---|
| Transport (UN / ADR) | UN 1993BF 3 / PGII |
| Water hazard class (WGK, DE) | 3 |
| Hazard codes (EU) | F,Xn |
| Risk statements (R) | 63-11-38-48/20-65-67 |
| Safety statements (S) | 16-36/37-62 |
Hazard information is provided for guidance. Always consult the product Safety Data Sheet (SDS), available on request, before handling.
| Mol Wt | average Mw ~400,000 by GPC |
|---|---|
| Transition Temp | Tg −5 °C |
Documentation
Every batch ships with a Certificate of Analysis covering assay, identity and purity; the grade is confirmed against your enquiry. Safety Data Sheets and technical data sheets are available on request.
Supply & logistics
Samples for technical evaluation; bulk MOQ by grade and packaging. In-stock material ships in 7–10 working days, worldwide, with full export documentation.
What is Poly(hexyl methacrylate) solution used for?
+
Poly(hexyl methacrylate) solution is utilized in materials science research, the development of flexible organic transistors, micro/nanoelectronics fabrication, and for creating hydrophobic coatings and films. It is also employed in self-assembly and contact printing applications.
What are the CAS number and chemical formula?
+
The CAS number is 25087-17-6, and the linear formula is (C10H18O2)n.
What grade and purity does Tech Serve Solutions supply?
+
Tech Serve Solutions supplies Poly(hexyl methacrylate) solution with an average Mw of ~400,000 by GPC, typically as a solution in toluene. We do not represent this product as USP, BP, or EP grade; it is intended for research and technical use.
How should Poly(hexyl methacrylate) solution be handled safely?
+
This solution is highly flammable (Flash Point: 4 °C) and presents health and environmental hazards. Handle in a well-ventilated area away from ignition sources, using appropriate personal protective equipment. It is harmful if swallowed or inhaled and may cause skin irritation, drowsiness, or be suspected of damaging fertility or the unborn child, and may cause organ damage through prolonged exposure. It is also toxic to aquatic life with long-lasting effects.
How is this chemical packed, shipped, and exported?
+
Poly(hexyl methacrylate) solution is packed according to UN 1993 specifications for flammable liquids, Class 3, Packing Group II. Tech Serve Solutions is a specialist global supplier and exporter of fine chemicals.
How can I request a sample or quote?
+
To request a sample or a quote for Poly(hexyl methacrylate) solution, please contact our sales department via the website or by telephone, providing your specific requirements.
▶ Related products
(11-Mercaptoundecyl)-N,N,N-trimethylammonium bromide
Micro / NanoElectronics
(11-Mercaptoundecyl)hexa(ethylene glycol)
C23H48O7S
Micro / NanoElectronics
(12-Phosphonododecyl)phosphonic acid
C12H28O6P2
Micro / NanoElectronics
(2,2,3,3,4,4,5,5,6,6,7,7,7-Tridecafluoroheptyl)oxirane
C9H5F13O
Micro / NanoElectronics
(2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,9-Heptadecafluorononyl)oxirane
C11H5F17O
Micro / NanoElectronics
(3-Chloropropyl)dimethoxymethylsilane
Cl(CH2)3Si(OCH3)2CH3
Micro / NanoElectronics
(3-Chloropropyl)trimethoxysilane
Cl(CH2)3Si(OCH3)3
Micro / NanoElectronics
(4-Bromophenyl)diphenylsulfonium triflate
C19H14BrF3O3S2
Micro / NanoElectronics▶ Explore more
3-Methyl-1,5-di-p-tolyl-1,4-pentazadiene
Chemical Synthesis
3-Methyl-1,5-pentanediol
Chemical Synthesis
3-Methyl-1-(2-methylphenyl)-1H-pyrazol-5-amine
C11H13N3
Chemical Synthesis
3-Methyl-1-(3′-sulfoamidophenyl)-5-pyrazolone
C10H11N3O3S
Chemical Synthesis